Avionics Door Seal

Neoprene Sponge Door Seal has worked as a replacement seal on such airframes as commander and others. We recomend our T-990 precleaner and our 1100-2 contact cement to install this seal.

As a standard door seal the BA-10012 has worked well in many different applications such as on both piper and cessna or other airframes. It is the same seal as the RB-5022 only it's hollow instead of solid. It is manufactured to the MIL-R-5002-type 1 spec. It is sold in 25ft. package or can be purchased by the foot. We recommend that you use the T-990 precleaner to clean the surface before installing it with our 1100-2 glue.

As a standard door seal the BA-1016 has worked well in many different applications such as on the mitsubishi or other airframes. It is manufactured to the MIL-R-6855-type 2 neoprene spec. It is sold in a 15ft. package. we recommend that you use the T-990 precleaner to clean the surface before installing it with our 1100-2 glue.

This seal has several different uses it has worked well on piper has some helicopter uses and other airframes. It is manufactured to meet the MIL-R-6855-type 2 neoprene spec. It is sold in a 25ft. package or can be purchased by the foot. Our 1100-2 glue will work very well to glue this seal in if needed.

As a standard door and baggage door seal the BA-10547 has worked well in many different applications such as on beechcraft,beagle or other airframes. It is manufactured to meet the ASTM-D-1056-67-SCE-41 spec. It is sold in 25ft. package or can be purchased by the foot.

Landing Gear Door Seal Stainless Steel with acrylic pile insert.

As a standard door seal the BA-1379 has worked well in many different applications such as on a british jet or other airframes. It is manufactured to meet the MIL-R-6855-type 2 neoprene spec. It is sold in a 25ft. package or can be purchased by the foot. If it needs to be glued we recommend that you use the T-990 precleaner to clean the surface and install it with our 1100-2 glue.

This is a neoprene bulb seal that has many different uses such as on a westwind or other airframes. It has a 5/8" flap & a 1/2" bulb. It is manufactured to meet the MIL-R-6855-type 2 neoprene spec. This seal be glued in with our 1100-2 glue and our T-990 precleaner. This seal can also be purchased by the foot.

This a neoprene bulb seal that has several different uses such as on a westwind or other airframes. It has a 5/8" flap with a 3/8" bulb. It is manufactured to meet the MIL-R-6855-type 2 neoprene spec. It can be glued using our 1100-2 glue Bulb Seal 25 FT.

As a standard door seal the BA-19100 has worked well in many different applications such as on several different older pipers or other airframes. This is solid door seal but do not mistake it for the RB-5022 the BA-19100 is much smaller it measures 3/8" tall by 1/2" wide. It is manufactured to the MIL-R-6130-C type 2 spec. and it also meets the FAR.25.853B burn spec. It is sold in a 25ft. package or can be purchased by the foot. We recommend that you use our T-990 precleaner to clean the surface before installig it with our 1100-2 glue.Door Seal 25 FT.

The BA-1911 is a silicone manufactured seal meeting the MIL-ZZR-765-class-2A-2B spec. This seal has a high temp. range of -60 to 550 F and to glue this seal you will have to use a silicone adhesive

This seal works very well in several different applications such as on a piper or other airframes. This is a closed cell neoprene sponge manufactured to meet the ASTM-D-1056-852A3 neoprene spec. It is sold in a 10ft. package. we recommend for glueing use our 1100-2 glue with our T-990 precleaner.

The BA-2610 is a grey silicone seal that has been used in many different applications such as on a cessna, lear jet, and a mooney. This seal in manufactured to meet the MIL-ZZR-765-2A silicone spec. It is only sold in a 10ft length.

The BA-28-1 is a high heat bulb seal that can be used in areas where heat is an issue. The temp. range of this seal is -60 to 550 F. It has a 7/16" flap with a 1/2" bulb. It is manufactured to meet the MIL-ZZR-765-class-1A silicone spec. This seal is sold by the foot only. You will have to use a silicone adhesive to install this seal if you need to glue it in place.

As a standard door seal the BA-333045-181 has worked well in many different applications such as on a westwind or other airframes. This seal has a clear color to it. It is manufactured to meet the MIL-ZZR-765-A silicone spec. This seal is sold in a 13ft. package only. If you need to glue this seal you will have to use a silicone adhesive

Door Seal 10 FT. Package

As a standard seal the BA-367-22 is a veery good seal it can be used with most any door seal. It is used to seal up that leaking door that won't quite seal up. This seal glues to the actual door frame it's self and can be installed with our T-990 precleaner & 1100-2 glue. It is manufactured to the MIL-R-6855-type 2 neoprene spec. It is sold in 25ft. package.

13/32"x 9/16" 1/4 Round Door Seal With Ridges. General purpose door seal that has worked well in many different applications such as cessna and others. We recomend our T-990 precleaner and our 1100-2 adhesive to install this seal.

As a standrd door seal the BA-37900 has worked well in many different applications such as on Cessna or other airframes. This seal is a sponge neoprene manufactured to meet the ASTM-D-1056 spec. It is sold in 25ft. package or can be purchased by the foot. We recommend that you use our 100-2 glue and our T-990 precleaner to install it with.

As a standard door seal the BA-420015-33 has worked in many different applications such as on a beechcraft or other airframes. It is manufactured to meet the MIL-R-6130-B-SCE-41. It is sold in a 12ft. length.

As a standard door seal the BA-430015-41 has worked well in many different applications such as on a beechcraft or other airframes. This is a closed cell neoprene sponge that is manufactured to meet the neoprene spec. It is sold in a 10ft. package. we recommend that you use our T-990 precleaner to clean the surface before you install it with our 1100-2 glue.

This is a door seal that has worked well on ballanca and other airframes. It is a neoprene sponge manufactured to meet the ASTM-D-1056-68-SCE-41 spec. This is sold in a 25ft. package or can be purchased by the foot. We recommend that you use our T-990 precleaner with our 1100-2 glue

As a standard door seal the BA-706-M has worked well in many different applications such as on older mooney's or other airframes. This seal is manufactured to meet the MIL-R-6855-type 2 neoprene spec. It is sold in a 12ft. package. We recommend that you use our T-990 precleaner to clean the surface before installing it with our 1100-2 glue.

As a standard door seal the RB-5022 has worked well in many different applications such as on piper and some cessna applications. This is a solid 1/4 round seal it is 5/8"x5/8". It is manufactured to meet the MIL-R-6130C-type 2 neoprene spec. and the FAR.25.853-B burn spec. This seal is sold in a 25ft. package or can be purchased by the foot. We recommend that you use our T-990 precleaner and 1100-2 glue to install it.

This seal has worked well in several different applications such as on a piper or other airframes as a door and baggage door seal. It is made of a neoprene sponge material that meets the ASTM-D-1056 spec. It is sold in 25ft. package or can be purchased by the foot. We recommend that you use our T-990 precleaner with our 1100-2 glue to install it.

The T-11001 Door seal has been used in many different applications such as on Beechcraft & Mooney. It is manufactured from a Neoprene material which can be glued in with our 1100-2 rubber contact cement.

This seal has worked well in many different applications. It has been used as a door seal or can be used as general purpose seal. It has a 3/8" bulb with a 5/8" flap. It has been manufactured to meet the MIL-R-6855 neoprene spec. It is sold in a 25ft. package or can be purchased by the foot. We recommend that you use our t-990 precleaner with our 1100-2 glue to install it.

This seal has worked well in many different applications. It has been used as a door seal or can be used as general purpose seal. It has a 3/8" bulb with a 5/8" flap. It has been manufactured fro white silicone. It is sold in a 25ft. package or can be purchased by the foot. We recommend that you use a silicone adhesive or trap it for instsllation

This is a neoprene rubber bulb seal that is manufactured to meet the MIL-C-3133-C spec. It has a 11/16" flap with a 5/16" bulb.

The T-15001 has worked well in many different applications such as on a bell or huey helicopter or other airframes. This seal works inconjuction with the T-8100 seal. It is manufactured to meet the MIL-ZZR-765-A-class 1A silicone spec. It is sold in 25ft. package or can be purchased by the foot. If you need to glue this seal you will have to use a silicone adhesive.

This seal has worked well in many different applications such as on a piper or other airframes. This seal has been manufactured to meet the ASTM-D-1056-68 spec. It measures 3/4" wide x 1/2" tall and is sold in a 25ft. package or can be purchased by the foot. We recommend that you use our T-990 precleaner with our 1100-2 glue to install it.

Our wind lacing is constructed of a very durable leather material sewn around a 5/8" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

Our wind lacing is constructed of a very durable leather material sewn around a 3/4" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

Our wind lacing is constructed of a very durable leather material sewn around a 7/8" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

Our wind lacing is constructed of a very durable leather material sewn around a 1" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

Our wind lacing is constructed of a very durable leather material sewn around a 1/4"" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

Our wind lacing is constructed of a very durable leather material sewn around a 3/8" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

Our wind lacing is constructed of a very durable leather material sewn around a 1/2" neoprene sponge cord. Several colors are available please specify in checkout what color. Colors are Grey, Blue, Black, Tan & Off-White. Packages are 12 Feet in length.

This is a closed cell neoprene sponge material with adhesive on one side of it . It is manufactured to meet the MIL-R-6130 spec. It is 1"wide x 1/4" tall x 20 foot long.

This is a closed cell neoprene sponge material with adhesive on one side of it . It is manufactured to meet the MIL-R-6130 spec. It is 1/2" wide x 1/4" tallx 20 foot long.

As a standard door seal the T-24002 has worked well in many different applications such as on a cessna or other airframes. It is manufactured to meet the MIL-C-3133-C neoprene spec. It is sold in 25ft. package or can be purchased by the foot. We recommend that you use our T-990 precleaner to clean the surface before installing it with our 1100-2 glue.

This is a grey silicone sponge material that has worked well in many different applications such as on a bell helicopter or other airframes. It is manufactured to meet the MIL-R-46089 grade F spec. This is a 3/16"x1/2"x25ft roll.

The T-4096 has worked well in many different applications such as on a cessna as a door seal and other airframes. It is a closed cell neoprene sponge manufactured to meet the MIL-R-6130-TYPE2 neoprene spec. It is sold in a 25ft package or can be purchased by the foot. To glue this seal we recommend that you use our T-990 precleaner with our 1100-2 glue.

This is a closed neoprene sponge seal that is manufactured to meet the ASTM-D-1056-68-SCE-41 spec. This seal is sold in 13ft package and we recommend that you use our T-990 precleaner with our 1100-2 glue to install it.

Gear Bumper Block

As a standard door seal the T-55040 has woeked well in many different applications such as on a cessna or other airframes. It is manufactured out of a neoprene sponge. It is sold in a 25ft package or can be purchased by the foot. We recommend that you use our T-990 precleaner to clean the surface before you install it with our 1100-2 glue.

The T-6400 has worked well in many different applications such as on a beechcraft or other airframes. It has a 1/2" flap and a 5/8" bulb. It is manufactured to meet the MIL-R-6855-type 2 neoprene spec. This seal is sold in 25ft. package or can be purchased by the foot. Our 1100-2 glue and our T-990 precleaner will work great for installing this seal if it needs to be glued.

The T-8100 has worked well in many different applications such as on bell and huey helicopters or other airframes. This seal works inconjuction with the T-15001 seal. It is manufactured to meet the MIL-ZZR-765-A-class 1A silicone spec. It is sold in 25ft. package or can be purchased by the foot. If you need to glue this seal you will have to use a silicone adhesive.

As a standard door seal the T-85590 has worked well in many different applications such as on a cessna or other airframes. It is a black neoprene sponge manufactured to meet the ASTM-D-1056-68-SCE-41 spec. This seal is sold by the foot. We recommend that you use our T-990 precleaner to clean the surface before installing it with our 1100-2 glue.

This seal has worked well as a door seal on beechcraft and other airframes. It is manufactured to meet the MIL-R-6855 neoprene spec. We recommend that you use our T-990 precleaner with our 1100-2 glue to install this seal. 15 foot package

As a standard door seal the T-89011 has worked well in many different applications such as on a jet stream or other airframes. It is manufactured to the MIL-ZZR-765-CLASS-1A spec. It is sold by the foot only. If you need to glue this seal you must use a silicone adhesive.

This seal will work in several different applications as a door seal piper,mooney or other airframes. This seal is a neoprene sponge manufactured to meet the ASTM-D-1056 spec. It is sold in 25ft. package or can be purchased by the foot. Our 1100-2 glue and our T-990 precleaner will work good for installing this seal.Please note, the bulb is approximately 1/2" OD.

Cowl Vent Seal 9 Ft PackageA heavy duty cowling seal constructed of buna-n cover sewn around a 1/2" silicone cord. It has a 1/2" bulb with a 1" flap and is sold in 9ft package. Some custom sizes are available.